A forward tipping dumper is commonly used on construction sites. It comes in range of different sizes and capability’s, it is used to transport large loads of materials across a site, usually on rough, undulating terrain. Its ability to handle a mixture of terrain and carry large loads makes it a flexible piece of equipment.

• Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator.
• Have a working knowledge of the manufacturer’s handbook for the particular machine to be used.
• Be able to locate and identify the major components of the machine and explain their functions.
• Be able to locate and identify key controls and explain their functions
• Conduct all pre-operational checks in accordance with manufacturers and legislative requirements.
• Identify and maintain PPE appropriate for forward tipping dumper use.
• Prepare the forward tipping dumper for use and operate safely and efficiently.
• Conduct all necessary safety checks at the work area.
• Attach and set trailers, ready for operation.
• Environmental considerations.
• Storage and transport of implements and attachments.
• Carry out all end of shift and shut down procedures.

• Suitable and safe area to operate and manoeuvre dumper.
• Excavator/loading machine.
• Bulk material to load and move.
• Varying terrain and slopes.
• Suitable and safe area to complete paperwork.
• Suitable welfare facilities.
• Forward tipping dumper.
• Operators’ manual.
• Risk assessment completed.

• Suitable head protection.
• Suitable eye protection.
• Suitable work clothes.
•  
• Suitable work boots including steel toe protection.
• High Viz.

• Avoiding danger from overhead power cables guidance GS6 https://www.hse.gov.uk/pubns/gs6.pdf
• Avoiding danger from underground services HSG47 https://www.hse.gov.uk/pubns/priced/hsg47.pdf
• PUWER Regulation
• https://www.hse.gov.uk/pubns/priced/l22.pdf
• LOLER Regulations
• https://www.hse.gov.uk/pubns/books/l113.htm

• 20 multiple choice questions.
• 5 written questions.
• 4 marks per question.
• 80% pass mark required.

• Pre use and operational checks
• Manoeuvre through a chicane applying the full steering range in both forward and reverse direction (un-laden and laden)
• Position for loading operation x 4
• Stop and start on the gradient whilst travelling up hill
• Stop and start on the gradient whilst travelling down hill
• Discharge the load over an edge or in excavation x 2
• Discharge the load to form a stockpile x 2
• Reverse the dumper (min 30m) in a straight line and through a restriction (unladen and laden)
• Pass mark is less than 20 penalty points and no mandatory disqualifications
• Time allowed is 1 hour

Onsite and off-site centre testing available